All data is for information only------(Home)
PRODUCT DATA of AM 350
MaterialAM 350
Product DatasheetPyromet 350
General InformationAlloy 350 is a chromium-nickel-molybdenum stainless steel which can be hardnened by martensitic transformation and/or precipitation hardening. The alloy can be hardened by subzero cooling and tempering (Condition SCT). Depending upon the heat treatment,alloy 350 may have an austenitic structure for best formability,or a martensitic structure with strengths comparable to those of martensitic steels. The alloy normally contains about 5 to 10% delta ferrite.
Chemical CompositionFe-16Cr-3Mo-4Ni-0.1N-1Mn-0.1C
EXPERIENCE IN PRACTICE
Equivalent DesignationsPyromet 350
PHYSICAL PROPERTIES
Specific Gravity7.92
ELASTIC PROPERTIES
Tensile Modulus203 GPa
THERMAL PROPERTIES
Thermal Conductivity14.5 W/m.K
Thermal Expansion Coefficient11.3 μstrain/°C
Melting Range1370 to 1400 °C
RELEVANT PROPERTIES FOR USE IN SPACE COMMUNITY
Stress Corrosion StatusHigh Resistance to SCC: Table 1
High resistance to stress corrosion in SCT1000 condition
Remark: acc. to ECSS-Q-ST-70-36C
Data Quality: Design Data
EMF vs SCE-0.06 V
Remark: Measured in 3.5% NaCl solution
Data Quality: Design Data
WeldingThis alloy can be successfully welded using all common methods with the notable exception of Oxyacetylene. While preheating the weld piece is not required, it is recommended that the material be annealed after welding to retain maximum properties. For best strength at elevated temperature a filler metal should be chosen that is of similar chemistry.